Nortel Networks COOLPIX S80 - Manual (Page 145)

133
Connecting to a Computer
Con
n
e
cti
ng t
o
Te
le
vi
sion
s, Comp
u
te
rs
a
n
d
Pr
in
te
rs
B
Notes on Power Source
• When connecting the camera to a computer to transfer images, use a fully charged battery to
prevent the camera from turning off unexpectedly.
• When the camera is connected to a computer via the supplied USB cable with Auto (default
setting) selected for the Charge by computer option in the setup menu, the battery inserted into
the camera is automatically charged using power supplied by the computer (
A 137, 159).
• If the AC Adapter EH-62D (A 169) (available separately) is used, COOLPIX S80 can be powered
from an electrical outlet. Do not use any other make or model of AC adapter as they may cause the
camera to overheat or malfunction.
Transferring Images from a Camera to a Computer
1
Start the computer to which ViewNX 2 was installed.
2
Be sure that the camera is off.
3
Connect the camera to the computer using the supplied USB cable.
Be sure that connectors are properly oriented. Do not attempt to insert connectors at an
angle, and do not use force when connecting or disconnecting the USB cable.
The camera is automatically turned on and the power-
on lamp will light or blink. The camera monitor will
remain off.
B
Connecting the USB Cable
The connection may not be recognized if the camera is connected to the computer via a USB hub.