Nokia 3230 User Manual

Page 183

183

3. The phone starts to search for devices within range. Devices using Bluetooth

technology that are within range start to appear on the display one by one. You
can see a device icon, the device’s name, the device type, or a short name.
Paired devices are shown with

. A paired device is one where a Bluetooth

connection already exists between your phone and the other device.

• To interrupt the search, press

Stop

. The device list freezes and you can start

to form a connection to one of the devices already found.

4. When searching for devices, some devices may show only the unique device

addresses. To find out the unique address of your phone, enter the code
*#2820# in standby mode when the Bluetooth connection is active.

If you have searched for devices earlier, a list of the devices that were found
previously is shown first. To start a new search, select

More devices

. If you

switch off the phone, the list of devices is cleared and the device search needs
to be started again before sending data.

5. Scroll to the device you want to connect with and press

Select

. The item you

are sending is copied to Outbox and the note

Connecting

is shown.

6. Pairing (if not required by the other device, go to step 7.)

• If the other device requires pairing before data can be transmitted, a tone

sounds and you are asked to enter a passcode.

• Create your own passcode (1-16 characters long, numeric) and agree with

the owner of the other device to use the same code. This passcode is used
only once and you do not have to memorise it.

• After pairing, the device is saved to the Paired devices view.