Nortel Networks 2002 - Manual (Page 43)

Configuring options
43
Configuring Area Code Setup
Use the Area Code Setup menu to save up to three area codes. When an
incoming call arrives with an area code that matches one of the three
stored area codes, the incoming call number is reordered to display the
telephone number followed by the area code (as opposed to the area
code followed by the telephone number). This reordering is also
performed when a user scrolls through the callers list. To configure the
area code, press the
Services key, select Telephone Options , and
select Call Log Option from the menu.
To configure default area codes (maximum of three):
3. Press the Up/Down navigation keys to
scroll and highlight one of the following:
— Preferred name match on
— Preferred name match off
4. Choose one of the following:
— Press the Select soft key to save the
configuration.
— Press the Cancel soft key to keep
existing configurations.
1. Press the Up/Down navigation keys to
scroll and highlight Area Code Setup .
2. Press the Select soft key.
or