Physical, Environmental – National Instruments Signal Processing Engineering Educational Device NI SPEEDY-33 User Manual
Page 28

Appendix A
Specifications
© National Instruments Corporation
A-3
Physical
PCB only
Dimensions ..................................... 8.89 cm
× 12.7 cm × 1.91 cm
(3.5 in.
× 5 in. × 0.75 in.)
Weight............................................. 87.9 g (3.1 oz)
With enclosure
Dimensions ..................................... 11.1 cm
× 14.5 cm × 3.9 cm
(4.4 in.
× 5.7 in. × 1.5 in.)
Weight............................................. 380 g (12.8 oz)
USB connector ....................................... Type B USB port, conforms to
USB Specification 1.1
Connector ............................................... Standard mini stereo jack
I/O connectors
J1, J2, J5, J12 .................................. 0.10 in.
× 0.10 in. × 0.23 in.
in 1
× 3 rows
J4 ..................................................... 0.10 in.
× 0.10 in. × 0.23 in.
in 2
× 5 rows
J6, J11 ............................................. 0.10 in.
× 0.10 in. × 0.23 in.
in 2
× 10 rows
Environmental
The NI SPEEDY-33 device is intended for indoor use only.
Operating temperature............................ 0 to 55 °C
Storage temperature ............................... –20 to 70 °C
Humidity ................................................ 10 to 90% RH, noncondensing
Maximum altitude .................................. 2,000 m
Pollution Degree .................................... 2
If you need to clean the module, use a soft, nonmetallic brush. Make sure
that the module is completely dry and free from contaminants before
returning it to service.