Nortel Networks N300 User Manual
Page 42
aDSL2+/3G wireless N300 4-Port modem Router
ymL15wN
42
www.netcomm.com.au
To add a Trigger Port, simply click the Add button. the following will be displayed.
Option
Description
Select an Application or
Custom Application
User should select the application from the list. or
User can enter the name of their choice.
Trigger Port Start
Enter the starting trigger port number (when you select custom application). When an
application is selected, the port ranges are automatically configured.
Trigger Port End
Enter the ending trigger port number (when you select custom application). When an
application is selected, the port ranges are automatically configured.
Trigger Protocol
tCP, tCP/UDP or UDP.
Open Port Start
Enter the starting open port number (when you select custom application). When an
application is selected, the port ranges are automatically configured.
Open Port End
Enter the ending open port number (when you select custom application). When an
application is selected, the port ranges are automatically configured.
Open Protocol
tCP, tCP/UDP or UDP
DMZ Host
Your Router will forward IP packets from the Wireless Area Network (WAN) that do not belong to any of the applications configured in the
Virtual Servers table to the DMZ host computer.
Enter the computer’s IP address and click Apply to activate the DMZ host. Clear the IP address field and click Apply to deactivate the DMZ
host.