NetComm HSPA 7.2 MBPS WI-FI ROUTER 3G9W - Manual (Page 51)

3G9W - HSPA 7.2Mbps Wi-Fi Router USER GUIDE
YML902 – 51
Options Description
Filter Name The filter rule label
Protocol TCP, TCP/UDP, UDP or ICMP
Source IP address Enter source IP address
Source Subnet Mask Enter source subnet mask
Source Port
(port or port:port)
Enter source port number or port range
Destination IP address Enter destination IP address
Destination Subnet Mask Enter destination subnet mask
Destination port
(port or port:port)
Enter destination port number or range
Click Save/Apply to save and activate the filter.
Incoming IP Filter
The default setting for all Incoming traffic is
BLOCKED. Under this condition only those incoming IP packets
that match the filter rules will be ACCEPTED.
To add a filtering rule, click the Add button. The following screen will display.
Please refer to the Outgoing IP Filter table for field descriptions.
Click
Save/Apply to save and activate the filter.