Philips SRU 5030/86 - Manual (Page 8)

5
Press the TV key to select TV.
Press the key until it lights up.
6
Press the 1 key.
– The DVD key flashes twice.
The DVD key will now allow you to operate
your second TV.
7
Program the SRU 5030 to operate the
second TV.
See ‘Setting the remote control’.
Adding a function to the remote control
If you want to add a function to the SRU 5030, you can contact the
Philips service line for Universal Remote Control to ask for the 5-figure code
for the extra function.
Restoring the original functions of your remote
control
1
Keep keys 1 and 6 on the SRU 5030 pressed
simultaneously for three seconds, until the
mode key (TV, DVD or VCR) flashes twice
and then remains lit.
2
Press keys 9, 8 and 1, in that order.
– The mode key (TV, DVD or VCR) flashes
twice.
All original functions have now been restored
and any extra functions have been deleted.
9
Instructions for use
English