Net2Phone Max 430 - Manual (Page 51)

Max 410/420/430 User’s Guide – Chapter 5
43
5. Click the Save button at the bottom of the page
to save the settings.
6. Click the Restart System link on the Site Map
page and then click the Restart button to reboot
the system.
NOTE:
• To receive Max-to-Max calls when
multiple ports are sharing a single
account, only one of the ports sharing
the account may have the Y selected.
• Only one call at a time can be made
using any given account number. If a
net2phone account number is entered
for an FXO port in the Account
Configuration Table, the account
entered acts as a “default” account
for the port. Charges incurred by
callers through that port automatically
accrue to this account.
• Whenever a selection in the Login
column is modified, the Max must be
restarted before the change will take
effect.
Multiple Account Management
For multiple account management:
1. For each port that is connected to a telephone or
PBX/KPS, enter the account number and PIN
that you intend to use with that port.
2. Make sure that Use account for all ports is
NOT checked.
3. Click the Save button after the desired changes
have been entered.
4. Click the Restart System link on the Site Map
page and then click the Restart button to reboot
the system.