How to make a phone call, Dial a voip phone call, Call features – NetComm V110 User Manual
Page 61
YML881Rev1
�11��� ��1���� ��11�� ����
�11��� ��1���� ��11�� ����
User Guide
www.netcomm.com.au
1
how to make a phone call
dial a VoIP Phone call
When your VoIP Gateway is configured properly, you can make a phone call via VoIP.
If you want to make a phone call, you can dial the phone number and press “#” button to start to dial the
phone number.
dial a PStn Phone call (V210P/V211)
By default outgoing calls should be placed with the VoIP service. If you want to make a phone call via the
PSTN pass-through port, you can press “0*” and dial the phone number.
note: on loss of power, the V210P/V211 will switch all calls from the fxS port through to the PStn pass-through.
The VoIP Gateway also provides some functions that list as below:
call features
The NetComm ATA also provides some functions that list as below:
Blind transfer
This feature allows a user (transferor) to transfer an existing call to another telephone number (transfer target)
without connecting to the transfer target number.
how to Use:
1.
During an existing call, perform a hook flash to put the other party on hold and get a dial tone.
2.
When you hear the dial tone, press #510# on your telephone dial-pad.
3.
When you hear the dial tone indicating that the VoIP Gateway is expecting a number, dial the phone
number to which you want to transfer the other party, then press # (optional) and then hang up the
phone.
Attendant transfer
This feature allows a user to transfer an existing call to another telephone number after first consulting with
the dialed party (transfer target) before hanging up.
how to Use:
1.
During an existing call, perform a hook flash to put the other party on hold and get a dial tone.
2.
When you hear the dial tone, press #511# on your telephone dial-pad.
3.
When you hear the dial tone, dial the telephone number to which the existing party is to be transferred,
then press # (optional).
4.
When the target transfer answers the phone, you may consult with the target transfer, and then hang up
your phone to transfer the call to the target transfer.