NetComm V110 - Manual (Page 16)

�11��� ��1���� ��11�� ���� User Guide YML881Rev1
1 www.netcomm.com.au
dhcP mode
1. Click on WAN on the left menu.
2. Change the IP Type to DHCP.
3. After that, click the Submit button.
option description
dnS Server 1 The Domain Name Service that the NetComm ATA uses to resolve domain names to IP
addresses. This is usually your modem / Router or the primary DNS server specified by
your Internet Service Provider (ISP). (Optional)
dnS Server 2 The Domain Name Service that the NetComm ATA uses to resolve domain names to
IP addresses. This is usually your modem / router. DNS 2 can be a different address to
DNS 1 to provide a backup DNS server if DNS 1 fails. (Optional)
mAc The Ethernet MAC address of the WAN interface. (Optional)
host name The host name of the VoIP Gateway. (Optional)
4. Click on Save Settings/Reboot on the left menu and then click the Save & Reboot button to save
your settings.
5. The NetComm ATA will reboot automatically to make your changes effective. Please wait while it reboots.