NetComm V110 - Manual (Page 51)

YML881Rev1 �11��� ��1���� ��11�� ���� �11��� ��1���� ��11�� ���� User Guide
www.netcomm.com.au 1
Virtual Server
Virtual Servers are used for port forwarding from the WAN to LAN networks. If any local PCs need to be
mapped to the UDP/TCP port on WAN side, you can enter the mappings here. There can be up to 24 different
Virtual Server configurations.
options description
Virtual Server Page Default page is Page1. There are 3 pages, Page 1 to Page 3
num
Show the number by sequence. There are a total of 24 numbers from mapping 0 to
mapping 23 that can be set.
enable Check to enable the port forwarding protocol.
Protocol TCP or UDP.
In Port
(Internal Port) Internal port number on the LAN side.
ex Port
(external Port) External port number on the WAN side.
Server IP Display the private network IP address for the particular server.
Select Select the item of the Virtual Server
enable Selected
[Button] Enable selected item
delete Selected
[Button] Delete selected item
delete All [Button] Delete all items
reset [Button]
Reset selected item