NEC LT20 - Manual (Page 20)

16 English ...
User Controls
Using the Remote Control
Power
Refer to the “Powering On/Off the Projector” section on pages
11-12.
AUTO ADJ. (Auto adjustment)
Automatically synchronizes the projector to the input source.
Keystone
Adjusts image distortion caused by tilting the projector (±8
degrees). Press the gyro-wheel first, and then slip up or down.
Source
Press “Source” to choose RGB, Component, HDTV, Composite
video and S-video sources.
PIC-MUTE (Picture Mute)
Press “PIC-MUTE” to hide image, press again to restore
display of the image.
Freeze
Press “Freeze” to pause the screen image.
Aspect Ratio
Selects the desired aspect ratio.
Menu
Press “Menu” to launch the on-screen display menu.
Four Directional Select Keys
Use to select items or make adjustments to
your selection.
Enter
Confirm your selection of items.
Exit
Exit the OSM menu.
AUTO ADJ. (Auto adjustment)
Automatically synchronizes the projector to the input source.
Exit
Exit the OSM menu.
™ “
..
” should be
pressed, the keystone
could be adjust.