Nortel Networks 6140 - Manual (Page 42)

42
Advanced features
To change the ring-tone or any other ring setting for any profile, go to User Profiles
and select the profile, and then select Ring Settings and Telephone Ring for standard
phone calls or one of the Message Alerts for text message. Then, select the ring
option that you want to adjust.
Default profile settings
To reset all user profiles to the default settings, contact your system administrator.
Data entry and editing
Enter number by pressing the keypad buttons. The blinking underscore, identifies the
cursor position. To enter alphanumeric strings,
CAPS/caps is displayed and can be
used to toggle the case. Enter letters by repeatedly pressing the corresponding key
until the desired letter is displayed on the screen. Use
CAPS to change the case as
needed.
To edit during entry 1. Press Del to delete the character to the
left of the entry.
2. Press Clr to delete an entry.
3. Enter the new data.
To edit an existing entry 1. Scroll using the Nav keys to move the
cursor position.
Setting/Profile Silent Vibrate Soft Loud Custom
Ring Cadence Off Off Telephone Telephone Telephone
Ring Tone Tone 1 Tone 1 Tone 1 Tone 1 Tone 1
Ring Volume 1 1 3 7 5
Vibrate Cadence Off Telephone Off Off Telephone
Ring Delay 0 0 0 0 5
Noise Mode Normal Normal Normal Normal Normal
Headset/Speaker Speaker Speaker Speaker Speaker Speaker
Key Tones Off Off On On On
Warning Tones Off Off On On On
Push-to-talk* Off Off On On On
*Push-to-talk is available only on the WLAN Handset 6140 .