Nortel Networks 6140 - Manual (Page 38)

38
Advanced features
interior.
The Ring Indicator icon location on the handset displays the RTLS icon, and indicates
that the RTLS administration option has been set to ON. When a call comes in, the
ring indicator replaces the RTLS icon.
When you are in the Config Menu and a call comes in, the RTLS icon starts blinking
on the top of the screen. There are two ways to get the phone to ring from this point:
1. Leave it alone and in 20 seconds the Config Menu will time out and
the phone will return to the idle screen and start ringing.
2. Press END or the Exit softkey to exit the Config Menu (because you
noticed the flashing phone icon) and the phone will return to the idle
screen and will start ringing.
At this point, the phone can be answered by pressing the START (offhook) key. If
desired, you can answer the call immediately without pressing END/Exit or letting
the menus timeout.
Speed-dial call
You can use your WLAN Handset 6120 and 6140 to assign up to 10 speed-dial call
keys to numbers in the Personal Directory.
From standby mode, open the speed-dial call list by selecting the Spdc soft key. If
programmed, the first item on this list is the system-wide speed-dial call number set
by the system administrator. It is marked with a greater-than (>) symbol on the left
side of the row. It is usually reserved for emergency situations.
To place a speed-dial call, press and hold the corresponding key for one second. The
system speed-dial key must be pressed for three seconds. The handset displays the
name and number for one second before it dials the call. You can press
End during
this second to terminate the call.
Alternatively, you can scroll using the Nav keys to highlight a number or listing and
press Start or Spkr to enter the number. Press Exit to return to standby mode.
A Personal Directory entry number can be assigned to a speed-dial key from the
speed-dial list. Select the speed-dial call key that you wish to assign and press
Set to
open the Personal Directory list. Use the Search feature or scroll using the Nav keys
to select the desired entry.