National Instruments 24-Bit Half/Full-Bridge Analog Input Module NI 9237 - Manual (Page 17)

© National Instruments Corp. 17 NI 9237 Operating Instructions and Specifications
or signals that have been filtered by at least the amount of the
stopband rejection.
Passband
The signals within the passband have frequency-dependent gain or
attenuation. The small amount of variation in gain with respect to
frequency is called the passband flatness. The digital filters of the
NI 9237 adjust the frequency range of the passband to match the
data rate. Therefore, the amount of gain or attenuation at a given
frequency depends on the data rate. Figure 4 shows typical
passband flatness for the NI 9237.