Nikon CoolPix S500 - Manual (Page 106)

94
Playback Options: The Playback Menu
Shooti
ng, Playback
, and Setup Me
n
u
s
z Slide Show
Play back pictures stored in the internal memory or
on a memory card in an automated “slide show”.
1
Display the slide show menu; use the
rotary multi selector to choose [Start]
and press d.
To change the interval between pictures, choose
[Frame intvl], select the desired interval time, and
press d before choosing [Start].
To repeat the slide show automatically, enable [Loop]
and press d before choosing [Start]. The check mark (y) will be added to the
loop option when enabled.
2
The slide show begins.
While the slide show is in progress, the following
operations can be performed:
• Use the rotary multi selector to switch pictures.
Continue rotating in either direction to fast forward
(clockwise) or rewind (counterclockwise).
• Press d to pause the slide show.
The menu shown at right is displayed when the slide
show ends or is paused. Choose [Restart] and press
d
to play the slide show again, or choose [End] to
stop the slide show and return to the playback menu.
j
Notes on Slide Show
• Only the first frame of movies (c 62) included in slide shows is displayed.
• Even if [Loop] is selected, the monitor will turn off automatically if no operations are per-
formed for 30 minutes. The camera will turn off automatically if no operations are per-
formed for another three minutes.
Slide show
Exit
Loop
Frame intvl
Start
Pause:
Slide show
Exit
Loop
Frame intvl
Start
Pause:
Frame intvl
Restart
End
Pause Pause Pause