Nortel Networks CG030601 - Manual (Page 13)

Configuration Guide
Contivity Secure IP Services Gateway
Frame Relay on Contivity Secure IP Services Gateway
CG030601 2.00 July 2003 Page: 13 of 14
Figure 6 Add Virtual Circuit Screen
4. In the VC field, type the virtual circuit number.
5. In the Description field, enter a description of the virtual circuit.
6. From the State menu, select whether this virtual circuit is enabled or disabled.
7. In the Local IP Address field, enter the virtual circuit IP address.
8. In the Subnet Mask field, enter the subnet mask of the IP address.
9. In the Remote IP Address field, enter the IP address of the remote end of this virtual
circuit.
10. In the DLCI field, enter the assigned DLCI number for this virtual circuit.
11. In the CIR field, enter the PVC’s committed information rate.
12. In the Bc field, enter the committed burst for this circuit.
13. In the BE field, enter the excess burst for this circuit.
14. Click OK to create this virtual circuit.