Nortel Networks CG030601 - Manual (Page 12)

Configuration Guide
Contivity Secure IP Services Gateway
Frame Relay on Contivity Secure IP Services Gateway
CG030601 2.00 July 2003 Page: 12 of 14
Using the Web interface to configure
To configure virtual circuits through the Web interface, follow these steps:
1. Go to the Frame Relay Interface screen, shown in Figure 4.
2. To bring up the Virtual Circuits page (Figure 5), click Configure Virtual Circuits button.
This page lists all virtual circuits that have been configured for this Frame Relay interface.
Figure 5 Frame Relay Virtual Circuits page
3. To add a virtual circuit, click Add, and the following screen appears (Figure 6).