National Instruments NI WAP-3711 - Manual (Page 14)

NI WAP-3701/3711 User’s Manual Getting Started
2-7
3. Type “ping default_gateway”, where default_gateway is the IP address of the default gateway
of the wireless client computer, and then press Enter. If the gateway responds, go to the next
step; otherwise, see Appendix B, “TCP/IP Settings Problems,” to troubleshoot the problem.
4. Type “ping 1st_dns_server”, where 1st_dns_server is the IP address of the primary DNS
server of the wireless client computer, and then press Enter. If this DNS server responds, go
to the next step; otherwise, see Appendix B, “TCP/IP Settings Problems,” to troubleshoot the
problem.