Nortel Networks Nortel M 7000 - Manual (Page 5)

Page 5
Conference FEATURE 3
Establish a conference call between yourself and two other parties.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press
FEATURE 3.
5. Press the line or intercom button of the first held call (not required on
model 7000, 7100 or 2001 telephones).
6. Press RLS to end the conference call.
To remove yourself from a conference permanently (unsupervised
conference):
Press FEATURE 70.
The other two callers remain connected. (Some external lines may not
support this feature.)
To put a conference on hold:
Press HOLD . The other two callers can still talk to each other.
To split a conference:
Press the line or intercom button of one caller to consult privately while the
other caller is on hold.
To re-establish the conference: Press FEATURE 3 .
To disconnect one party:
1. Press the line or intercom button for the caller you want to disconnect.
2. Press
RLS .
3. Press the line or intercom button for the remaining caller to resume your
conversation.
To independently hold two calls:
1. Press the line or intercom button of the first caller.
2. Press
HOLD . The second caller is automatically put on hold.
To re-establish the conference:
1. Retrieve one call from hold.
2. Press
FEATURE 3.
3. Retrieve the second call from hold.
Telephone features