Migrating from raid 1 to raid 0 – Nvidia 4 User Manual
Page 90
86
MediaShield User’s Guide – Version 4.0
C
HAPTER
3
Using the NVIDIA MediaShield RAID Management Utility
Migrating from RAID 1 to RAID 0
The following example shows you how to convert from a RAID 1 array with two disks to
a RAID 0 array with two disks.
1 Goto the system BIOS and make sure that the drives that you want to use are RAID
enabled.
2 Boot to Windows and launch the MediaShield application then follow the steps
outlined in
“Creating a Mirrored Array” on page 51
to create a two-disk mirror array.
When that is done, you should see a screen shot similar to the following:
Figure 3.75 RAID Array Created
Now that a two disk mirrored array has been created, you can use the MediaShield
convert feature to migrate the array from a two-disk RAID 1 into a two-disk RAID 0
array.