Nvidia 4 - Manual (Page 31)

NVIDIA Corporation 27
C HAPTER 2
Setting Up Your RAID Configuration
Completing the RAID BIOS Setup
1 After assigning your RAID array disks, press F7.
The Clear disk array prompt appears.
Figure 2.16 Clear Disk Data Prompt
2 Press Y to clear the disk data.
The Array List screen appears, where you can review the RAID arrays that you have
set up.
Figure 2.17 Array List Window
MediaShield Utility
- Define a New Array -
RAID Mode : Striping Block:
Free Disks
Loc Disk Model Name
Array Disks
Loc Disk Model Name
[->] Add
[ ] Del
Mirroring Optimal
1.0.M
1.1.M
ST380023AS
ST380023AS
[F6] Back [F7] Finish [TAB] Navigate [ ] Select [ENTER] Popup
Clear disk data?
[Y] YES [N] NO
MediaShield Utility
- Array List -
[Ctrl-X] Exit [ ] Select [B] Set Boot [N] New Array [ENTER] Detail
Boot Id Status Vendor Array Model Name
Yes 2 Healthy NVIDIA MIRROR 74.53G