The migrating process – Nvidia 4 User Manual
Page 121
NVIDIA Corporation
117
C
HAPTER
3
Using the NVIDIA MediaShield RAID Management Utility
5 Click Next, then Finish.
In this example, the WD360GD was chosen as shown in
.
Figure 3.123 New RAID Array
The Migrating Process
As you can see from the screen shot above, a three disk RAID 0 array has been created and
the migrating process has begun. A pop up window similar to the following will appear:
followed by the following pop up window:
It will take some time before the entire process is completed. The time is takes to convert
an array is dependent on several factors such as the speed of the CPU, the size and type of
hard drive being used, the operating system, etc.