Nokia 2180 - Manual (Page 60)

55
Touch Tone Strings
Touch Tone strings can be used for sending and receiving
information with your phone. For example, you can store
your office voice mailbox number, along with your pass-
word for easy access to your messages.
To store Touch Tone strings
Store Touch Tone strings the same way you store
phone numbers.
You can store a whole digit sequence in a memory loca-
tion and send it as Touch Tones for frequently-used
strings of numbers.
These number strings can also be linked with other stored
phone numbers. Read on for more information on linking
strings with stored numbers.
To send a Touch Tone string
During a call, with the display empty (make sure Menu 4 3
is not set to 2II)
1) Dial or recall from memory the string you want to send
2) Press 0HQX, then
í
Note: Use caution when sending confidential information
over the air when using DTMF tones in analog mode.
Special Characters
Pressing
∗∗∗ creates a “p” (pause) when you are storing
numbers. When the number is dialed, the digits stored to
the right of the “p” are automatically sent as touch tones
after a 2.5 second pause.
Pressing
∗∗∗∗ creates a “w” (wait) when you are storing
numbers. The “w” makes the phone wait for you to press
the '70) soft key, then it sends the digits stored to the
right of the “w” as touch tones.
You can add as many “p” and “w” characters as you need
in a single number sequence.