Nikon Coolpix S4100 - Manual (Page 39)

27
Step 1 Turn the Camera On and Select A (Auto) Mode
Bas
ic Ph
otography an
d Pl
ayba
ck
: A
(Auto)
M
o
de
Indicators Displayed in A (Auto) Mode
When the monitor has turned off in standby mode to save power (the power on
lamp is blinking) (
A 158), press the following buttons to turn it back on:
- Power switch, shutter-release button, A button or
b (e movie-record)
button
B
Note on Touch Shutter
At the default setting, the shutter can be released by simply tapping a subject in the monitor
(
A 45). Take care that you do not release the shutter accidently.
D
Functions Available in A (Auto) Mode
• When the camera is pointed at a human face, the face detection function, with which the camera
automatically detects that face and focuses on it, activates ( A 30, 41).
• Shooting settings (A 34, 42) can be changed by tapping the left or bottom tab to display the
setting controls.
D
Motion Detection
See
Motion detection (A 155) in the setup menu (A 146) for more information.
D
Electronic Vibration Reduction
When the flash mode ( A 34) is set to c (off) or d (slow sync) with Electronic VR (A 154) in the
setup menu set to
Auto, the R icon may be displayed in the monitor. When R is displayed, the
effects of camera shake may be pronounced under the current shooting conditions. In these
situations, the camera reduces the effects of camera shake in pictures before recording them.
3 33
Shooting mode
A displayed in A (auto)
mode.
Internal memory indicator
Indicates that images will be stored in the camera’s internal memory (approximately
20 MB).
When a memory card is inserted in the camera, C does not appear and images will be
stored on the memory card.
Motion detection icon
The effects of subject
movement and camera
shake are reduced.