Nikon Coolpix S4100 - Manual (Page 167)

155
Setup Menu
Basi
c Came
ra Setup
U Motion Detection
Enable motion detection to reduce the effects of subject movement and camera
shake when shooting still pictures.
The current motion detection setting can be confirmed in the camera monitor
with shooting (
A 10, 27). The motion detection icon turns green when the
camera detects camera shake and increases shutter speed. When
Off is selected,
no icon is displayed.
B
Notes on Motion Detection
• Motion detection may be unable to completely eliminate the effects of subject movement and
camera shake in some situations.
• Motion detection may not function if the subject exhibits significant movement or is too dark.
• The pictures taken using motion detection may be somewhat “grainy” in appearance.
Tap the bottom tab ( A 147) M Tap z (Setup menu) M U Motion detection
Auto (default setting)
When the camera detects the subject movement or camera shake, the ISO
sensitivity and shutter speed are automatically increased to reduce blurring.
However, motion detection does not function in the following situations.
• Subject tracking is selected for the touch shooting setting
• When the flash fires
• When ISO sensitivity (A 53) is set to Fixed range auto, or ISO sensitivity is
fixed at a particular value in A (auto) mode
• When Multi-shot 16 (A 54) is selected
• When Sports (A 64), Night portrait (A 64), Dusk/dawn (A 66), Night
landscape (A 66), Museum (A 68), Fireworks show (A 68), or
Backlighting (A 69) scene mode is enabled
Off
Motion detection is not enabled.