Nortel Networks NP-4046-100 - Manual (Page 8)

Page 8
To scroll through the speed-dial list:
1. Press once.
2. Scroll through the list shown on the display to find the number you want.
3. Press .
Dial an external telephone number using a two-digit code (01 to 70).
System speed dial codes can be used from any display telephone in the system.
They are assigned by your System Administrator.
To make a call using a speed dial code:
1. Invoke the code.
2. Enter the two-digit code assigned to the parked call (01 to 70).
Use SWCA codes to retrieve and park calls on the system.
On display telephones, these codes will be assigned to buttons with indicators. On
the NetVision handset, these codes may appear on the Function menu, or you
enter the codes manually, using the menu Feature function.
Parking a call to SWCA keys:
Make a call available to any other telephone with the same SWCA key
assignment. Also follow these procedures if you retrieved a SWCA call, and want
to repark it.
– If you have the keys assigned to the feature menu: Choose the menu item
corresponding to a SWCA key or a SWCA key search command.
– If the code is not assigned to the feature menu use the Feature menu item, and
then enter the feature code for the SWCA key.
– If you want the system to assign an open SWCA key: Enter
. (This code can also be assigned to the feature
menu.)
Answering a SWCA call:
– If you know where the call is parked:
Choose the Feature menu item, then enter the feature code for the SWCA key.
The call becomes active on an intercom key.
– To find the oldest parked call: Enter .
(This code can also be assigned to the feature menu.)
The call that has been parked the longest will become the active call on your
intercom key.
FCT
SND SND
System
Speed Dial
0
QZ
SWCA keys
System Wide
Call
Appearance
< 5
JKL
2
ABC
1 < 5
JKL
3
DEF
6
MNO
< 5
JKL
2
ABC
0
QZ
< 5
JKL
3
DEF
7
PRS