Accessory settings – Nokia 3510i User Manual

Page 99

Screen saver

A digital clock screen saver is used for power saving in standby mode. It activates
when no function of the phone has been used for a certain length of time. Press
any key to deactivate the screen saver. The screen saver is also deactivated when
the phone is out of the network coverage area.

Press

Menu

and select

Settings

Display settings

, and

Screen saver timeout

. Select

the length of time after which the digital clock display will be activated. The
timeout can vary from 5 seconds to 60 minutes.

Note that the screen saver overrides all graphics and texts that are on the display
in standby mode.

■ Accessory settings

The accessory settings menu is only shown if the phone is or has been connected
to one of the following accessories: headsets HDC-5 or HDE-2, loopset LPS-3, or
handsfree car kits PPH-1 or CARK 125.

Press

Menu

, select

Settings

and

Accessory settings

. Select

Headset

Handsfree

Loopset

• Select

Default profile

to select the profile you want to automatically activate

when you connect the selected accessory. You can select another profile while
the accessory is connected.

• Select

Automatic answer

to set the phone to automatically answer an

incoming call after five seconds. If the

Incoming call alert

is set to

Beep once

Off

, automatic answer will not be used.