National Instruments NI CVS-1450 Series - Manual (Page 16)

Chapter 2 Setup and Configuration
NI CVS-1450 Series User Manual 2-2 ni.com
❑
10 m 10/100Base-T Ethernet cable (part number
189174-10)—Standard Category 5 (CAT-5) 10/100Base-T Ethernet
cable that connects the CVS-1450 device to a network port. To connect
the CVS-1450 device directly to a local development computer, use an
Ethernet crossover cable.
Note To maintain signal integrity, the Ethernet cable length must be no longer than 100 m.
Software
❑
NI-IMAQ for IEEE 1394 Cameras driver software, which includes the
CVS-1450 Series support software
❑
One of the following application software packages:
– NI Vision Builder for Automated Inspection (AI) 2.0 or later
– NI LabVIEW Real-Time Module 7.0 or later with the Vision
Development Module 7.0 or later
Accessories
National Instruments offers the following accessories for use with a
CVS-1450 device.
Hardware
• VGA-resolution camera (part number 778785-01)
• 12 mm fixed focal length lens (part number 778789-01)
• LED ring light (part number 778787-01)
• NI Vision I/O terminal block and prototyping accessory (part number
779166-01)
• DIN rail/panel mount kit (part number 189154-01)
• Digital I/O cable and horizontal DIN rail terminal block (part number
778790-01)
• Digital I/O cable and vertical DIN rail terminal block (part number
778791-01)
• 75
Ω SMB 111 coaxial cable (part number 763422-01)—SMB to
BNC cable for connecting to triggers and light sources
• 10 m Ethernet crossover cable (part number 187375-10)—For
connecting the CVS-1450 device directly to the development
computer