Nokia 3390 - Manual (Page 66)

[ 53 ]
Advanced calling features
11
Note: The order of the following steps may vary, depending on which
dialing sequence your card uses.
6 Enter the access number (usually the 1-800 number listed on the
back of the calling card), then press OK.
7 Enter the card number and/or PIN, then press OK.
8 Your phone displays Save changes? Press OK.
9 When Dialing sequence appears again, scroll to Card name and press
Select.
10 Enter the card name, then press OK.
11 Press Select to choose that calling card as the current calling card.
12 Press and hold to return to the start screen.
Choose a calling card
1 Press Menu 5 4 2.
The current calling card setting appears highlighted.
Dialing sequence
Use for cards
that require you to:
Cards using
this sequence
Access no.
+ Phone no.
+ Card no. Dial the 1-800 access number,
then phone number, then card
number (+ PIN if required). MCI, AT&T True
Choice, Sprint
Canada, Unitel
Access no.
+ Card no.
+ Phone no. Dial the 1-800 access number,
then card number (+ PIN if
required), then phone number. networkMCI,
WorldPhone MCI
Prefix
+ Phone no.
+ Card no. Dial the prefix (any numbers
that must precede the phone
number) and phone number
you want to dial, then card
number (then PIN, if required). GTE, PacBell, AT&T,
Stentor