Nortel Networks Passport 241-5101-200 - Manual (Page 25)

25
Passport 8250 Installation Guide R2.2
Chapter 3
Installing the Passport 8250 device
This section provides the following procedures for installing the Passport
8250 device:
1 “Mounting the chassis in a rack” (page 25).
2 “Connecting cables to the ports” (page 29).
3 “Connecting the dual power supply” (page 33).
4 “Securing the cables to the rack” (page 35).
Mounting the chassis in a rack
The Passport 8250 device can be mounted on the following racks:
• 19 “ rack. For details, see “Mounting the Passport 8250 device on a 19”
rack” (page 26).
• New equipment building system (NEBS) rack. For details, see
“Mounting the Passport 8250 device on a NEBS or ETSI rack” (page 28).
• European Telecommunication Standards Institute (ETSI) rack. For
details, see “Mounting the Passport 8250 device on a NEBS or ETSI
rack” (page 28).
Safety precautions
Mount the Passport 8250 device using the following safey precautions:
• Do not place the device in direct sunlight, near warm air exhausts or
heaters.
• Do not place the device around water.