Nortel Networks Passport 241-5101-200 - Manual (Page 24)

24 Chapter 2 Preparing for the hardware installation
241-5101-200 R2.2
Getting the tools to mount the chassis in a rack
To mount the chassis in a rack, you will need one or more of the following
tools:
• 9.5 mm wide flat-bladed screwdriver for 19” or ETSI rack installation.
• 10 mm A/F nut driver for NEBS rack installation.
• Pozidrive screw driver suitable for a M4 screws for assembling the
mounting brackets to the chassis.
• Small flat-bladed screwdriver for securing the “D-type looking” screws.