Neo Car Audio Car Audio - Manual (Page 18)

16
FORD Appendix
Neo ION Connection
2004 - Town Car, Grand Marquis, Marauder,
LS and Ford Crown Vic.
1. Preparing the Neo Ford-12pin Cable
Take the Neo Ford 12pin cable and cut off the black 12-pin harness. You will use
only the cable and big White 22 pin connector (connects to the black box).
2. Connection to the Vehicle
There are two connectors located behind the radio, a 16 pin connector and a 24
pin connector.
We will first work with the 16 pin connector.
16pin Connector:
Neo Red to 16pin connectors Orange/Black cable (Pin #9)
Neo Blue to 16pin connectors Gray cable (Pin #10)
Neo Green to 16pin connectors Light Green/Red cable (Pin #1)
Neo Pink to 16pin connectors Violet cable (Pin #2)
Neo Yellow to 16pin connectors Light Blue/Pink cable (Pin #7)
Neo White to 16pin connectors Tan cable (Pin #8)
Neo Brown to 16pin connectors Light Green/Black cable (Pin #6)
24pin Connector:
Neo Gray to 24pin connectors Violet/Light Blue cable (Pin #1)
Neo Orange to 24pin connectors Black/Light Green cable (Pin #24)
*Important Note:
Some vehicle production runs do not have a cable plugged into the 16pin pin
connector on the back of the headunit. If you are installing in this type of vehicle
you can use another Neo cable (For example the Honda cable) and shave the
plastic off of the white 22pin connector and remove the pins inside. These pins
can then be inserted into the holes on the back of the vehicles stereo. Call
technical support if you need further assistance with this option.