Neo Car Audio Car Audio - Manual (Page 12)

V E H I C L E I N S T A L L A T I O N
10
Chrysler (Chrysler, Jeep, Dodge, Plymouth, Eagle)
Make sure the Neo iON is compatible with your vehicle, Check for “Disc ^” printed
on preset button “1”. If you see it, it means that your radio can control the Neo iON.
Before connecting any cables you must set the dip switch box to the position listed for
your vehicle. If you set the dip-switches after you have connected cables to the box,
you must disconnect and reconnect them for the iON to operate.
Chrysler’s use one of three cables (Old Din, New Din, New 10-pin). Remove the radio
to see which cable fits your vehicle, and then refer to settings below.
Do not force cables in.
Use the “Chrysler Old” cable with vehicles 1995-1999/2000.
RADIOS WITH SQUARE SHAPE
Use the “Chrysler New