Nikon WT-3 - Manual (Page 37)

29
Network Status
The status of the link between the server and the WT-3 is shown by the status LEDs
and by the display in the top level of the wireless transmitter menu.
The Status LEDs
The POWER LED lights when the WT-3 is on. Signal qual-
ity is shown by the LINK LED: the faster the LED blinks,
the better the signal and the faster data can be trans-
mitted. The BUSY LED lights while data are being sent.
Status POWER LINK BUSY
Camera or exposure meters off , or Off selected for
Wireless transmitter > Wireless LAN system
(off ) (off ) (off )
Connecting to computer (on) (on) (off )
Waiting for connection (on) (blinks) (off )
Connected; camera control possible (on) (blinks) (on)
Connection error (blinks) (off ) (off )
WT-3 hardware malfunction (blinks) (blinks) (blinks)
The Status Display
Network status can also be viewed in the top level of the wireless transmitter
menu.
Status area: The status of the
connection to the host. The
host name is displayed in
green when a connection is
established. Any errors that
prevent the camera from
connecting to the host are
also displayed here.
Signal strength: This icon shows fi ve levels of wireless signal
strength. It is displayed in red when no signal can be detect-
ed. For maximum signal strength, ensure a clear line of sight
between the WT-3 antenna and the wireless LAN adapter or
access point. A
icon is displayed when the WT-3 is con-
nected via Ethernet.