Figure 1-3. removing the scxi 119x, Figure 1-3, Removing the scxi-119 x -13 – National Instruments SCXI-1190/1191 User Manual
Page 21
Chapter 1
Installing and Configuring the SCXI-119X
© National Instruments Corporation
1-13
Figure 1-3. Removing the SCXI-119X
Removing the SCXI-119X from Measurement & Automation Explorer
To remove a module from Measurement & Automation Explorer, complete
the following steps:
1.
Double-click the Measurement & Automation Explorer icon on
your PC desktop.
2.
Display the list of installed devices and interfaces by clicking the +
next to Devices and Interfaces.
3.
Locate the chassis in the list of installed devices. Display the list of
modules in the chassis by clicking the + next to Chassis.
4.
Right-click on the module or chassis you want to delete and select
Delete.
5.
You will be presented a confirmation window. Click Yes to continue
deleting the module or chassis or No to cancel this action.
1
SCXI Chassis Power Switch
2
SCXI Chassis
3
SCXI-119
X (SCXI-1191 Shown)
4
SCXI Module Thumbscrews
®
MAINFRAME
SCXI
3
4
1
2