Figure 1-1, Installing the scxi-119 x into an scxi chassis -3 – National Instruments SCXI-1190/1191 User Manual
Page 11
Chapter 1
Installing and Configuring the SCXI-119X
© National Instruments Corporation
1-3
Installing the SCXI-119X Module into an SCXI Chassis
You need the following items to complete the installation:
•
SCXI-119X module
•
SCXI chassis
Follow these steps to install your SCXI-119X module into an SCXI chassis
while referring to Figure 1-1.
Figure 1-1. Installing the SCXI-119X into an SCXI Chassis
1.
Turn off the computer that contains the DAQ device or computer-based
instrument, or disconnect the computer from your SCXI chassis.
2.
Turn off the SCXI chassis.
Caution
Do not insert the SCXI-119X module into a chassis that is turned on as doing so
could damage the module.
3.
Remove the protective plastic caps from the module’s thumbscrews so
that the module will insert correctly.
1
Slot 1
2
Slot 2
3
Slot 3
4
Slot 4
5
SCXI Chassis
6
SCXI Chassis Power Switch
7
SCXI-119
X (SCXI-1191 Shown)
8
SCXI Module Thumbscrews
®
MAINFRAME
7
8
6
5
SCXI
1
2
3
4