New Holland 451 User Manual
New holland sicklebar mower specifications
New Holland
Sicklebar Mower Specifications
451 456
Page 1 of 1
MODEL
451
456
seven-foot
nine-foot
CUTTERBAR LENGTH
7’3” (2210 mm)
9’3” (2819 mm)
9’3” (2819 mm)
OVERALL LENGTH
3’11” (1188 mm)
3’11” (1188 mm)
7’6” (2286 mm)
OVERALL WIDTH
operating
12’5” (3785 mm)
14’5” (4395 mm)
15’3” (4648 mm)
transport
6’2” (1870 mm)
7’2” (2175 mm)
7’2” (2175 mm)
HEIGHT
operating
3’3” (991 mm)
3’3” (991 mm)
3’3” (991 mm)
transport*
5’8” (1715 mm)
6’8” (2032 mm)
6’8” (2032 mm)
WEIGHT, APPROXIMATE
609 lb. (276 kg)
628 lb. (285 kg)
803 lb. (364 kg)
MOWER DRIVE
Heavy-duty V-belt
Heavy-duty V-belt
Heavy-duty V-belt
KNIVES
speed
........................................1600 strokes per minute at 540 rpm..........................................................
stroke
3.375” (86 mm)
3.375” (86 mm)
3.375” (86 mm)
CUTTERBAR OPERATING RANGE
......................15 degrees below horizontal, 35 degrees above horizontal ........................................
TRACTOR REQUIREMENT
................Fits most CAT I and II 3-point hitch ..................
Fits most tractors with standard
tractors with 540 rpm PTO
ASAE drawbar and 540 rpm PTO
* plus lift range of tractor
LIFTS: Both lifts operable from the tractor seat. Tractor remote ram required for hydraulic lift on Model 456. Tractor power lift is standard on Model 451.
Safety begins with a thorough understanding of
the equipment.
Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention
to
all
safety
and
operating
decals and never operate machiner y
without all shields, protective devices
and structures in place.
Design,
materials
and/or
specifications are
subject to
change
without
notice
and
without
liability
therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
var y outside these areas.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Visit our Web site at www.newholland.com/na. Or, call toll-free 866-NEW-HLND (866-639-4563).
The mounted 451 has an exclusive telescoping
yoke that uses tractor power to lift the mower.
Straight-line motion of the drive head provides fast,
smooth cutting combined with less wear on the
knife assembly and hold-down clips.