Eizo COLOREDGE CG243W - Manual (Page 30)

0 Chapter 4 Power Saving Function
-. Setting Power Indicator [Power Indicator]
The brightness of the power indicator (blue) when the screen is displayed can be adjusted (default setting
is set to light up when power is turned on, and brightness is set to 4).
Procedure
Choose from the Adjustment menu, and press
.
Choose from the menu, and press
.
Select the indicator brightness “Off” or in the range from 1 to 7 with
or as desired.
Press to exit the adjustment.
-. Setting Monitor’s Automatic Brightness Adjustment
[Auto EcoView]
The sensor on the lower side of the monitor detects the environmental brightness to adjust the screen
brightness automatically and comfortably by using the Auto EcoView function.
Attention
The Auto EcoView function is not available in CAL mode.
Be careful not to block the sensor on the lower side of the monitor when using the Auto EcoView function. •
•
Procedure
Choose from the Adjustment menu, and press
.
Choose from the menu, and press
.
Select “On” or “Off” with
or .
Press to exit the adjustment.
1.
2.
3.
4.
1.
2.
3.
4.