Eizo COLOREDGE CG243W - Manual (Page 19)

19 Chapter 2 Adjusting Screen
●
To perform advanced adjustments
The menu of the Adjustment menu allows you to set and save the independent color adjustment
for each mode.
Attention
Wait 30 minutes or more from monitor power on before starting the color adjustment.
(Allow the monitor to warm up for at least 30 minutes before making adjustments.)
Perform the range adjustment first when adjusting color for analog input signals.
(Refer to “To adjust color gradation automatically” on
page 17
).
The same image may be seen in different colors on multiple monitors due to their monitor-specific characteristics.
Make fine color adjustment visually when matching colors on multiple monitors.
•
•
•
NOTE
The values shown in “%” or “K” are available only as reference.
•
●
Adjustment items in each mode
According to the mode selected, the adjustable function differs.
(You can not select any function unavailable for adjustment or setting.)
The adjustments or settings made for each mode are applied to all input signals.
For the adjustment method of each function, refer to subsequent pages.
√ : Adjustment available ―: Invalid for adjustment
Icon Function
Color Mode
1-Custom 2-sRGB 3-EBU 4-REC709 5-SMPTE-C
6-DCI
7-CAL1
8-CAL2
9-CAL3
Brightness
√ √ √ √ √ √ ―
Contrast
√ ― ― ― ― ― ―
Temperature
√ √ √ √ √ √ ―
Gamma
√ √ √ √ √ √ ―
Hue √ ― ― ― ― ― ―
Saturation
√ ― ― ― ― ― ―
Outline
Enhancer
√ √ √ √ √ √ ―
Gain
√ ― ― ― ― ― ―
Black Level √ √ √ √ √ √ ―
6 Colors √ ― ― ― ― ― ―
Color Reset
√ √ √ √ √ √ ―