NetComm HS800 - Manual (Page 59)

Rev. 1 - YML698 www.netcomm.com.au
HS800 User’s Guide Page 59
605 to RJ-11 adapter
The 605 to RJ-11 adaptor is provided to comply with the older 610
Telstra wall socket. The 605 to RJ-11 adapter may be used to
convert the supplied RJ-11 cable, if the older connection is
required.
USB cable
A typical USB cord has an "A" connection (“upstream” to plug into the computer) and a “B”
connection (“downstream” to plug into the device).
By using different connectors on the upstream and downstream ends, cable connection is
simplified. The “B” connection will fit a into the “B” socket of any USB device. Similarly,
any "A" connector can be plugged into any "A" socket, such as on a computer.
If it is a new device, the operating system auto-detects it and asks for the driver disk. If the
device has already been installed, the computer activates it and starts talking to it. USB
devices can be connected and disconnected at any time.
9 Pin (RS-232 ) Serial Cable
A 9 Pin (RS-232) Serial Cable may be used to connect a device to a serial console terminal
or a PC running a terminal emulation program, such as Hyper Terminal.
“A” Connection
“B” Connection
Pin No Name Notes/Description No.
1 DCD Data Carrier Detect
2 RD Receive Data (a.k.a RxD, Rx)
3 TD Transmit Data (a.k.a TxD, Tx)
4 DTR Data Terminal Ready
5 SGND Ground
6 DSR Data Set Ready
7 RTS Request To Send
8 CTS Clear To Send
9 RI Ring Indicator
Male Connector