NetComm HS800 - Manual (Page 47)

Rev. 1 - YML698 www.netcomm.com.au
HS800 User’s Guide Page 47
Item Default Description
IP Address Empty Enter the IP address you would like to pass
through.
Subnet Mask Empty Enter the subnet mask you would like to pass
through.
MAC Address Empty Enter the MAC address you would like to pass
through.
Mask Empty Enter the subnet mask of you would like to
pass through.
Pass Through List Display the pass through Information of
HS800 Wireless Gateway.
No. - The index number of the pass through
address.
Active Disable Click on check box, active or inactive the pass
through address.
Address List - Display the pass through address(s).
Type - Display the type of pass through address.
Delete Disable Select the check boxes and click ‘Delete’ to
delete the pass through address(s).
Click the Add to List button to add a new entry.
Click the Apply button to save the new settings.
Click the Delete All & Apply button to delete all entries.
Note: The priority of “pass through” is higher than “Filtering”.