4 pass through – NetComm HS800 User Manual
Page 46

www.netcomm.com.au
Rev. 1 - YML698
Page 46
HS800 User’s Guide
3-4 Pass Through
This function allows the administrator to allow some special devices to pass through the
HS800 Wireless Gateway system. Some network devices might be connected under the
HS800 Wireless Gateway, but do not need to be checked and authorized for access. The
HS800 Wireless Gateway provides a pass through list that allows the administrator to
control which devices can pass through without authentication.
Figure 3-59 Pass through Setting Screen
Item
Default
Description
Pass Through
Disable
Enables or disables the pass through function.
Destination URL/IP Address Pass Through
URL or Website
Empty
Enter the URL of the page in this format: http:/
/www.yahoo.com. Maximum characters: 20.
Start IP Address
Empty
Enter the first IP address in the range to allow
pass through.
End IP Address
Empty
Enter the last IP address in the range to allow
pass through.
Subscriber IP/MAC Address or LAN Device Pass Through
Start IP Address
Empty
Enter the first IP address you would like to
pass through.
End IP Address
Empty
Enter the last IP address you would like to
pass through.