5 three button printer, 5-1 changing the paper, 5-2 test print – NetComm HS800 User Manual

Page 10

www.netcomm.com.au

Rev. 1 - YML698

Page 10

HS800 User’s Guide

1-5 Three Button Printer

Figure 1-5 Three Button Thermal Printer

1-5-1 Changing the paper

If there is no paper, the Button A indicator will be flashing. To change the paper:

Step 1:

Open the clear cover by pressing down the lever on the right hand side of the
printer.

Step 2:

Remove the old roll.

Step 3:

Insert the new roll so that the paper edge is facing away from the front of the
printer.

Step 4:

Close the clear cover.

Step 5:

Press and release Button A to feed the paper through.

1-5-2 Test Print

To print a test page on the Printer:

Step 1:

Turn the power off.

Step 2:

Hold down Button A and turn the power on.

Step 3:

Release Button A and the printer will print a test page.

Button A

Button B

Button C