Nautique Crossover 90490 - Manual (Page 85)

4-17
Controls and Indicators
Erasing the User Codes
Make sure the system indicator light is off.
Enter the Master Embedded Code and press and release the 1/2
key and the 7/8 key at the same time to erase the system user codes.
The keyless ignition will now act as if there are no codes in memory.
Pressing the START key will unlock the system and pressing the
STOP key will lock it without entering a code. Follow the steps in
“Programming the Primary User Code” in this section.
Nautique Cruise Control
The steering wheel hub cruise control remote has five control
buttons:
(ON/OFF)
SET
CNCL (Cancel)
s/RES (increment UP/Resume)
t(decrement DOWN)
CORC219
216V Sec 4_2009.qxd:Naut Air Sec 4.qxd 1/21/09 9:21 AM Page 17