Nautique Crossover 90490 - Manual (Page 65)

3-7
Crossover Nautique 216V/226
Description
1. Bow Navigation Light
2. Bow Lifting Ring
3. Anchor Storage
4. Storage
5. Cruise Control GPS Module
6. Belly Tank Vent
7. Dash Pod and Console
8. Hydro-Gate ™ Control and SportShift ™
9. 12-Volt Port/Auxiliary Input
10. Automatic Bilge and Ballast Tank Gauge Panel
11. Engine Compartment Air Intake
12. Tower Board Racks
13. Fuel Tank Fill
14. Watersports Tow Point
15. Forward Bilge Pump Outlet
16. Aft Bilge Pump Outlet
17. Starboard Ballast Tank Vent
18. Storage Trunk/Bilge Water Filters (European market)
19. Anchor Light Receptacle (not included with Flight Control Tower
™
option)
20. Rudder Shaft Remote Lube Fitting (European market)
21. Stern Lifting Ring
22. Aft Bilge Pump/CE Fire Suppressor
23. Boarding Platform
24. Storage Trunk
25. Engine Cooling Water Intake Strainer
26. Port Ballast Tank Vent
27. Engine Flushing Adaptor
28. Built-in Cooler/T-Handle Drain/Seacock Access Seacocks (shut-off
valves, ballast intake/drain, described starboard to port) Engine
Cooling, Belly Ballast, Aft-Starboard Ballast, Aft-Port Ballast
29. Tower Watersports Tow Point
30. Cockpit Entrance Tread
31. Fuel Tank Vent
32. Removable Cooler
33. Observer’s Seat/Storage Access
34. Forward Bilge Pump/Storage/Anchor Light Storage
35. Battery Selector Switch/PMA Panel/Breaker Panels
36. Glove Box/Stereo/Auxiliary Input/12V Port
37. Waste Basket
The primary battery is located in the port/aft storage compartment. The
optional secondary battery is located in the cockpit starboard storage area.
216V_226 Sec 3_2009.qxd:Naut Air Sec 3.qxd 2/16/09 1:50 PM Page 7