Power management access (pma) panel, Bilge, Volt recpt – Nautique Crossover 90490 User Manual
Page 100: Volt port, Circuit breakers
4-32
Section 4
Power Management Access (PMA) Panel
Your Nautique is equipped with a PMA panel to manage other
components of the electrical system. It includes breakers, switches
and a 12-volt port.
Bilge
This switch is meant to turn on the bilge pumps when the battery
selector switch is set to OFF, thereby minimizing battery drain.
12-Volt Recpt.
This switch is meant to turn on the 12-volt ports when the battery
selector switch is set to OFF, thereby minimizing battery drain.
12-Volt Port
This receptacle can be used to power and charge cellular phones,
MP3 players, video cameras or other electronics. This receptacle is
powered through a 10-amp breaker. Limit the amperage to 10
amps.
Circuit Breakers
The circuit breakers are the manually reset type. A tripped circuit
breaker will extend. To reset, press in the extended circuit switch
shield. If a breaker continues to trip, this may indicate a problem.
Contact your Nautique dealer and have the problem corrected.
12
30
50
20
20
20
15
30
5
30
PME
POWER
AMP1
BALLAST
AMP2
AUTO
BILGE
BILGE
STEREO
BELLY
STBD
PORT
MEMORY
ACC
BILGE
12-VOLT
12V
216V Sec 4_2009.qxd:Naut Air Sec 4.qxd 1/21/09 9:21 AM Page 32