Nautique Crossover 90490 - Manual (Page 77)

4-9
Controls and Indicators
Belly, Port, Starboard Ballast
These buttons fill and drain the ballast tank designated to the
switch. Ballast tanks are an option on most Nautique boats. A full
description of how these buttons function is discussed in Section 4,
Ballast Tank Control Switches
.
Underwater Lights
This switch controls the transom underwater lights. DO NOT
operate lights while the boat is out of the water.
Heater Fan (if equipped)
The heater button controls four different heater functions.
Pressing and releasing the heater button turns on Low Speed.
Press again for Medium Speed.
Press again for High Speed.
Press again for Off.
The indicator light for this button will illuminate if the heater is
running at any of the three speeds.
Courtesy/Docking Lights
Press and release for courtesy lights, press and hold from this
position to turn docking lights on with courtesy lights. To turn the
courtesy lights and the docking lights off, press and release.
Docking lights only: from the OFF position, press and hold until
the docking lights are on and release, to turn off, press and release.
NOTICE
If either or both of the two light functions are on, the indicator
light will illuminate and a press and release will turn off any of
the lights that are on.
216V Sec 4_2009.qxd:Naut Air Sec 4.qxd 1/21/09 9:21 AM Page 9