Nortel Networks ATA 2 - Manual (Page 5)

P0941629 Issue 05 Business Communications Manager ATA 2 User Guide
About Business Communications Manager
ATA 2
What does ATA 2 do?
Business Communications Manager Analog Terminal Adapter 2 (ATA 2) connects
a station port to a standard analog voice device, such as a single-line telephone or a
data communication device, such as a modem or facsimile machine. The ATA 2
provides on-premise service only.
This guide describes:
• ATA 2 features used with the Business Communications Manager base unit
• Data Communication information
• Troubleshooting
All of the features available from Business Communications Manager ATA 2 are
accessed by pressing
û¥ on your telephone and pressing a feature or
access code. The feature list shows
û¥ and the feature code. Where
applicable, steps are included to help use each feature. If your telephone does not
have a
û button, you must use the hook switch (located under the
handset). The hook switch must be pressed for approximately one half of one
second.
If your telephone does not have a
¥ or £ button, you must use dialpad numbers.
To indicate a
¥ press Ú. To indicate a £ press Ü.
For more information about feature operations, accessing feature operations or
feature codes, see your System Administrator.