Niles Audio DMS4 - Manual (Page 8)

8
CONTROLS AND CONNECTIONS
FRONT vIEw
Niles
DMS4
Out Albums CD Setup
MENU
6 10 7 2 1 4 3
5
9 8
11 12
14
DMS4
4 S T R E A M D I G I T A L M U S I C S E R V E R
15 13
This section provides information about the controls and
connections available on your IntelliControl ® ICS DMS4 Digital
Music Server.
DISC TRAY
Discs should be inserted with the label side up.
OPEN/CLOSE button
Pressing the OPEN/CLOSE button opens the disc tray. Place a
compact disc on the tray with the label side facing up. Press the
button again to close the tray.
MENU button
Press the MENU button to display the Main Menu screen.
ACTION buttons
Action buttons allow you to perform specific operations
dependent on the current menu screen. For more information
on using the action buttons, refer to The Front Panel Interface
section.
DISPLAY
The display shows information about the music available on the
unit, the status of the DMS4 Digital Music Server (for instance if
the unit is currently playing), and the current configuration of the
unit.
SELECT button
Selects the option currently visible on the display.
NAVIGATION buttons
The navigation buttons allow you to move up, down, left or right
through the menus shown on the display.
N OUTPUT button
This button is used to select the current audio output.
d / f button
When the button is pressed briefly during playback, play restarts
at the beginning of the current track. A second brief press
moves to the beginning of the previous track. When the button
is held for a longer period of time the music will rewind at high
speed.
c / e button
When the button is pressed briefly during playback, play restarts
at the beginning of the next track. When the button is held for a
longer period of time the music will fast forward at high speed.
h PAUSE button
Press the pause button to interrupt playback temporarily.
a PLAY button
Press the play button to resume playback if the music has been
stopped or paused.
g STOP button
Press the stop button to halt playback on the current audio
output.
STANDBY
Press the standby button to turn your DMS4 Digital Music Server
off, press again to switch your DMS4 Digital Music Server back
on.
REMOTE SENSOR
This window receives signals transmitted from the remote control
unit.
Fig. 1-1 DMS4 Front Panel